Moka pot physics

Light the stove and watch the pressure build inside the pot. Take it off the heat before it sputters and the coffee ends up on the stove. The hotter you run it, the less time you get.

  1. Warming up
  2. Building pressure
  3. Coffee flowing
  4. Sputtering

Hover or tap a part of the pot to see what it does.

3 of 6
Stove
Grind
Water
Lid
Speed
Try

Space lights the stove and takes the pot off. P pauses, R resets.

Ready to brew

Water temperature
20 °C
Boiler pressure
0.00 bar
Flow through the coffee
0.0 ml/s
Coffee in the pot
0 ml
Spilled on the stove
0 ml
Time
0:00
Coffee flowed for
Peak pressure
Likely notes

Brew log

  • This run
  • Coffee flowing
  • Sputtering

Drag across the log to replay any moment of the brew.

Why high heat is harder

Two things push

Sealed in the boiler is a small pocket of air. As it heats it expands, and water vapour adds to it. Together they push water up the funnel and through the coffee.

The ending speeds up

As water leaves, the air pocket grows and its push fades, so vapour has to take over, and that needs hotter water. With less water left, the same flame heats it faster. The second half of the pot goes much quicker than the first.

The pot keeps going

Off the stove, the hot metal and the built-up pressure keep pushing. On low heat that finishes the brew gently. On high heat it carries you straight into the sputter, so you have to pull much sooner.

How it ends up on the stove

Leave the pot on and the final sputter throws coffee out of the top. An open lid lets far more escape, and so does a fast flow on high heat. An electric plate makes it worse because it stays hot long after you turn it down, so lift the pot off instead.

This is a teaching model of a three-cup pot, not a calibrated simulator. The numbers are ballpark figures to make the relationships visible. Your stove, grind, dose and pot will behave differently, so follow the maker's instructions for the real thing.